ITW EAE Support Center

FDC9100/L91 replacement for Protocol Plus or Protocol3 Controls Installation Instructions

See attached for instructions to install kit part number 9-274769 CTL KIT FDC9100/L91 TO REPLACE P3 OR P+

After the control kit is installed, see links below for instructions on how to configure the control and high limit for your oven.

FDC9100 Configuration Instructions

L91 High Limit Configuration Instructions

Dan is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.