ITW EAE Support Center

Upgrading Power Wires to Actuator Control Board

Attached you will find the process for upgrading the power wires to an actuator control board.  This process may be needed when noise causes random movement on the actuator, potentially slamming into the hard stop.  The actuator will make random moves that are not standard.  

This process is for fluxers with the new style of actuator board and is for Servojet, Servospray, or Servosoninic fluxers used on Electrovert wave solder machines Econopak +, Econopak Gold, Vectra ES, Vectra ES 2, Vectra ES 3, Vectra, Vectra 2, Vectra 3, Electra, Electra 3, and Electra 4.

MyLinda is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.