ITW EAE Support Center

Uninterruptible Power Supply Advanced Menu Adjustments

Electrovert Wave Solder & Reflow machines offer an option for an Uninterruptible Power Supply. If after installation of the machine you have Intermittent UPS failure alarms, the cause could be from possible power spikes or surges in the facility power.

The sensitivity of the UPS unit can be adjusted by the parameters from the front panel of the power supply once you change the Menu Type in the configuration from standard to advance. Standard Menu configuration is the default setting and the way the UPS ships from the factory. Please review the attached manual. The operation section begins on page 16. Use the keys to change the configuration Menu type to advance. The possible parameters to adjust have been highlighted in the manual.  

 If you have any questions feel free to contact Electrovert Technical support @ 800-737-8110 .

Michael is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.